Rail and Crane Rail

Accessories

CAR BLOCKS

CB-6 RAIL CLAMP

Portable rail clamps are easily applied to rail head to prevent movement of crane wheels or other rolling stock. The clamp bodies are made of cast steel in two size as follows: style" A" is for use with rails weighing 40 to 100 lbs. per yard and style "F" for 105 to 175 lbs. rails including all heavy crane rail sections.

Corresponding weights-42 and 50 lbs. each.

MODEL C CAR BLOCKS

Lightweight and strong model C car blocks have a rotating cam locking device for extra safety. They lock so tightly to the rail that they are used daily on barges to prevent car movement. They lock so tightly to rail that they are used daily on barges to prevent car movement. the model C-3 is specially designed as crane block and is very popular in mills and wherever overhead cranes are used.

Specifications

	C-1	C-2	C-3
Weigh Each lbs./(kgs.)	26 (12)	39 (18)	50 (23)
For Use on Rails: lbs (kgs.)	60 to 85	85 to 140	135 to 175
	(30 to 42)	(42 to 70)	(67 to 87)

Note: CAR BLOCKS ARE BLOCKING CRANES, NOT FOR IMPACT STOPPING.

CARNE STOPS (PORTABLE)

SHUR-STOP^{® CRANE STOPS}

^{PORTABLE SLIDING TYPE}

^{SHUR-STOP are recommended where a sliding-type crane stop is needed and where}^portability^{and quick}^attachment^{and quick removal to rail are important consideration.}^{SHUR-STOP use a w}^{edge and clamp action for positive stopping of moving crane. Wedge has rail guide ears which are
bent to grip rail head to insure}^alignment^{of wedge. Series of cinch plates create drag to retard movement after crane wheel makes contact with wedge.}^Available^{for most wheel makes contact rail sizes. Specify crane rail size and section when}^ordering^.^weight^{35 lbs. SHUR-STOP must be used in pairs.}

Model 430F MODIFIED

Model 430F modified Stops are designed for non-standard railroad application such as cranes and other devices that use to guide and facilitate movement. they are normally sold in pairs.